General information |
Product type designation |
AI 4xRTD/TC 2-/3-/4-wire HF |
Firmware version |
V2.0 |
● FW update possible |
Yes |
usable BaseUnits |
BU type A0, A1 |
Color code for module-specific color identification plate |
CC00 |
Product function |
● I&M data |
Yes; I&M0 to I&M3 |
Engineering with |
● STEP 7 TIA Portal configurable/integrated as of version |
V12 SP1 / V13 |
● STEP 7 configurable/integrated as of version |
V5.5 SP3 / V5.5 SP4 |
● PCS 7 configurable/integrated as of version |
V8.1 SP1 |
● PROFIBUS as of GSD version/GSD revision |
GSD Revision 5 |
● PROFINET as of GSD version/GSD revision |
GSDML V2.3 |
Operating mode |
● Oversampling |
No |
● MSI |
No |
CiR – Configuration in RUN |
Reparameterization possible in RUN |
Yes |
Calibration possible in RUN |
Yes |
Supply voltage |
Rated value (DC) |
24 V |
permissible range, lower limit (DC) |
19.2 V |
permissible range, upper limit (DC) |
28.8 V |
Reverse polarity protection |
Yes |
Input current |
Current consumption, max. |
35 mA |
Power loss |
Power loss, typ. |
0.75 W |
Address area |
Address space per module |
● Address space per module, max. |
8 byte; + 1 byte for QI information |
Analog inputs |
Number of analog inputs |
4 |
● For voltage measurement |
4 |
● For resistance/resistance thermometer measurement |
4 |
● For thermocouple measurement |
4 |
permissible input voltage for voltage input (destruction limit), max. |
30 V |
Constant measurement current for resistance-type transmitter, typ. |
0.7 mA; 1.7 mA for Cu10 sensors |
Cycle time (all channels), min. |
Sum of the basic conversion times and additional processing times (depending on the parameterization of the active channels); for line compensation in case of a three-wire connection, an additional cycle is necessary |
Technical unit for temperature measurement adjustable |
Yes; °C/°F/K |
Input ranges (rated values), voltages |
● -1 V to +1 V |
Yes; 16 bit incl. sign |
● Input resistance (-1 V to +1 V) |
1 MΩ |
● -250 mV to +250 mV |
Yes; 16 bit incl. sign |
● Input resistance (-250 mV to +250 mV) |
1 MΩ |
● -50 mV to +50 mV |
Yes; 16 bit incl. sign |
● Input resistance (-50 mV to +50 mV) |
1 MΩ |
● -80 mV to +80 mV |
Yes; 16 bit incl. sign |
● Input resistance (-80 mV to +80 mV) |
1 MΩ |
Input ranges (rated values), thermocouples |
● Type B |
Yes; 16 bit incl. sign |
● Input resistance (Type B) |
1 MΩ |
● Type C |
Yes; 16 bit incl. sign |
● Input resistance (Type C) |
1 MΩ |
● Type E |
Yes; 16 bit incl. sign |
● Input resistance (Type E) |
1 MΩ |
● Type J |
Yes; 16 bit incl. sign |
● Input resistance (type J) |
1 MΩ |
● Type K |
Yes; 16 bit incl. sign |
● Input resistance (Type K) |
1 MΩ |
● Type L |
Yes; 16 bit incl. sign |
● Input resistance (Type L) |
1 MΩ |
● Type N |
Yes; 16 bit incl. sign |
● Input resistance (Type N) |
1 MΩ |
● Type R |
Yes; 16 bit incl. sign |
● Input resistance (Type R) |
1 MΩ |
● Type S |
Yes; 16 bit incl. sign |
● Input resistance (Type S) |
1 MΩ |
● Type T |
Yes; 16 bit incl. sign |
● Input resistance (Type T) |
1 MΩ |
● Type U |
Yes; 16 bit incl. sign |
● Input resistance (Type U) |
1 MΩ |
● Type TXK/TXK(L) to GOST |
Yes; 16 bit incl. sign |
● Input resistance (Type TXK/TXK(L) to GOST) |
1 MΩ |
Input ranges (rated values), resistance thermometer |
● Cu 10 |
Yes; 16 bit incl. sign |
● Input resistance (Cu 10) |
1 MΩ |
● Ni 100 |
Yes; 16 bit incl. sign |
● Input resistance (Ni 100) |
1 MΩ |
● Ni 1000 |
Yes; 16 bit incl. sign |
● Input resistance (Ni 1000) |
1 MΩ |
● LG-Ni 1000 |
Yes; 16 bit incl. sign |
● Input resistance (LG-Ni 1000) |
1 MΩ |
● Ni 120 |
Yes; 16 bit incl. sign |
● Input resistance (Ni 120) |
1 MΩ |
● Ni 200 |
Yes; 16 bit incl. sign |
● Input resistance (Ni 200) |
1 MΩ |
● Ni 500 |
Yes; 16 bit incl. sign |
● Input resistance (Ni 500) |
1 MΩ |
● Pt 100 |
Yes; 16 bit incl. sign |
● Input resistance (Pt 100) |
1 MΩ |
● Pt 1000 |
Yes; 16 bit incl. sign |
● Input resistance (Pt 1000) |
1 MΩ |
● Pt 200 |
Yes; 16 bit incl. sign |
● Input resistance (Pt 200) |
1 MΩ |
● Pt 500 |
Yes; 16 bit incl. sign |
● Input resistance (Pt 500) |
1 MΩ |
Input ranges (rated values), resistors |
● 0 to 150 ohms |
Yes; 15 bit |
● Input resistance (0 to 150 ohms) |
1 MΩ |
● 0 to 300 ohms |
Yes; 15 bit |
● Input resistance (0 to 300 ohms) |
1 MΩ |
● 0 to 600 ohms |
Yes; 15 bit |
● Input resistance (0 to 600 ohms) |
1 MΩ |
● 0 to 3000 ohms |
Yes; 15 bit |
● Input resistance (0 to 3000 ohms) |
1 MΩ |
● 0 to 6000 ohms |
Yes; 15 bit |
● Input resistance (0 to 6000 ohms) |
1 MΩ |
● PTC |
Yes; 15 bit |
● Input resistance (PTC) |
1 MΩ |
Thermocouple (TC) |
Temperature compensation |
— parameterizable |
Yes |
— Reference channel of the module |
Yes |
— internal comparison point |
Yes; with BaseUnit type A1 |
— Reference channel of the group |
Yes |
— Number of reference channel groups |
4; Group 0 to 3 |
— fixed reference temperature |
Yes |
Cable length |
● shielded, max. |
200 m; 50 m with thermocouples |
Analog value generation for the inputs |
Measurement principle |
integrating (Sigma-Delta) |
Integration and conversion time/resolution per channel |
● Resolution with overrange (bit including sign), max. |
16 bit |
● Integration time, parameterizable |
Yes |
● Basic conversion time, including integration time (ms) |
|
— additional processing time for wire-break check |
2 ms; In the ranges resistance thermometers, resistors and thermocouples |
— additional power line wire-break check |
2 ms; for 3/4 wire transducer (resistance thermometer and resistor) |
● Interference voltage suppression for interference frequency f1 in Hz |
16.6 / 50 / 60 Hz |
● Conversion time (per channel) |
180 / 60 / 50 ms |
Smoothing of measured values |
● Number of smoothing levels |
4; None; 4/8/16 times |
● parameterizable |
Yes |
Encoder |
Connection of signal encoders |
● for voltage measurement |
Yes |
● for resistance measurement with two-wire connection |
Yes |
● for resistance measurement with three-wire connection |
Yes |
● for resistance measurement with four-wire connection |
Yes |
Errors/accuracies |
Linearity error (relative to input range), (+/-) |
0.01 %; ±0.1 % for resistance thermometers and resistance |
Temperature error (relative to input range), (+/-) |
0.0009 %/K; ±0.005 % / K at thermocouple |
Crosstalk between the inputs, min. |
-50 dB |
Repeat accuracy in steady state at 25 °C (relative to input range), (+/-) |
0.05 % |
Operational error limit in overall temperature range |
● Voltage, relative to input range, (+/-) |
0.1 % |
● Resistance, relative to input range, (+/-) |
0.1 % |
Basic error limit (operational limit at 25 °C) |
● Voltage, relative to input range, (+/-) |
0.05 % |
● Resistance, relative to input range, (+/-) |
0.05 % |
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency |
● Series mode interference (peak value of interference < rated value of input range), min. |
70 dB |
● Common mode voltage, max. |
10 V |
● Common mode interference, min. |
90 dB |
Isochronous mode |
Isochronous operation (application synchronized up to terminal) |
No |
Interrupts/diagnostics/status information |
Diagnostics function |
Yes |
Alarms |
● Diagnostic alarm |
Yes |
● Limit value alarm |
Yes; two upper and two lower limit values in each case |
Diagnostic messages |
● Monitoring the supply voltage |
Yes |
● Wire-break |
Yes; channel by channel |
● Group error |
Yes |
● Overflow/underflow |
Yes; channel by channel |
Diagnostics indication LED |
● Monitoring of the supply voltage (PWR-LED) |
Yes; Green PWR LED |
● Channel status display |
Yes; Green LED |
● for channel diagnostics |
Yes; Red LED |
● for module diagnostics |
Yes; green/red DIAG LED |
Potential separation |
Potential separation channels |
● between the channels |
No |
● between the channels and backplane bus |
Yes |
● between the channels and the power supply of the electronics |
Yes |
Permissible potential difference |
between the inputs (UCM) |
10 V DC |
Isolation |
Isolation tested with |
707 V DC (type test) |
Dimensions |
Width |
15 mm |
Height |
73 mm |
Depth |
58 mm |
Weights |
Weight, approx. |
30 g |
last modified: |
06/07/2019 |