€ 275,00  /tk
(€ 341,00 /tk KM-ga)

Overview

Programmable transducer for continuous conversion of AC current, AC voltage without a DC component or frequency into a standard DC analog output signal or RS-485 communication.

Features

Conversion	AC current, AC voltage or frequency
Accuracy class	0.2
Programming	PD14 programmer with e-Con software
Galvanic isolation	Input, output, supply, programming interface

Measuring Inputs

AC voltage range 1	0..1..100..130VAC
AC voltage range 2	0..2.5..250..325VAC
AC voltage range 3	0..4..400..600VAC
AC current range 1	0..0.01..1..1.3A
AC current range 2	0..0.05..5..6.3A
Frequency	20..500Hz

Outputs

DC current output 1	0..20..22mA
DC current output 2	4..20..22mA
DC voltage output	0..10..11VDC
Current output load	≤250Ω
Voltage output load	≥500Ω
Resolution	0.01% of range

Digital Interface

Interface	RS-485
Protocol	Modbus RTU
Transmission modes	8N2, 8E1, 8O1, 8N1
Baud rates	4.8, 9.6, 19.2kbit/s

Supply

Supply option 1	85..253VAC 40..400Hz, 90..300VDC
Supply option 2	20..40VAC 40..400Hz, 20..60VDC
Power consumption	<3VA

Operating Conditions

Ambient temperature	-20..60°C
Storage temperature	-25..85°C
Relative humidity	<95%
Operating position	Any
Preheating time	15min
Measurement averaging time	≥0.5s
Maximum altitude	<2000m

Mechanical Data

Dimensions	22.5x120x100mm
Housing protection	IP40
Terminal-side protection	IP20
Mounting	35mm DIN rail according to EN 60715

Safety ^Compatibility

Noise immunity	EN 61000-6-2
Noise emissions	EN 61000-6-4
Electrical safety	EN 61010-1
Pollution degree	2
Installation category	III, category II for 400VAC option

Datasheet | User Manual