e-Elit - leading
electronic and automation component
online distributor

	Items:	Total:
	0	€0.00

Show all products categ.

Need assistance?

Panel Feed-through Terminal Block HDFK 50I, 10pcs/pck, Phoenix

Item properties

Brief article description	Panel feed-through terminal block
Connector system	HDFK 50
Range of articles	HDFK 50
Pitch	18.8 mm
Number of positions	1

Nominal current	150 A
Nom. voltage	690 V
Maximum load current	150 A (with 50 mm² conductor cross section)
Rated voltage (III/3)	690 V
Rated surge voltage (III/3)	8 kV

Connection method	Screw connection with tension sleeve
Connection direction of the conductor to plug-in direction	0 °
Conductor cross section solid	16 mm² ... 50 mm²
Conductor cross section flexible	16 mm² ... 50 mm²
Conductor cross section flexible, with ferrule without plastic sleeve	10 mm² ... 50 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve	10 mm² ... 50 mm²
2 conductors with same cross section, solid	6 mm² ... 16 mm²
2 conductors with same cross section, flexible	10 mm² ... 16 mm²
2 conductors with same cross section, flexible, with ferrule without plastic sleeve	6 mm² ... 16 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve	6 mm² ... 10 mm²
Internal cylindrical gage	B10
Stripping length	24 mm
Torque	6 Nm ... 8 Nm

Connection method	Screw connection with tension sleeve
Connection direction of the conductor to plug-in direction	0 °
Conductor cross section solid	16 mm² ... 50 mm²
Conductor cross section flexible	16 mm² ... 50 mm²
Conductor cross section flexible, with ferrule without plastic sleeve	10 mm² ... 50 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve	10 mm² ... 50 mm²
2 conductors with same cross section, solid	6 mm² ... 16 mm²
2 conductors with same cross section, flexible	10 mm² ... 16 mm²
2 conductors with same cross section, flexible, with ferrule without plastic sleeve	6 mm² ... 16 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve	6 mm² ... 10 mm²
Internal cylindrical gage	B10
Stripping length	24 mm
Torque	6 Nm ... 8 Nm

Note	WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Contact material	Cu alloy
Surface characteristics	tin-plated

Housing color	gray (7042)
Insulating material	PA
Insulating material group	I
CTI according to IEC 60112	600
Flammability rating according to UL 94	V0
Glow wire flammability index GWFI according to EN 60695-2-12	850
Glow wire ignition temperature GWIT according to EN 60695-2-13	775
Temperature for the ball pressure test according to EN 60695-10-2	125 °C

Dimensional drawing
Caption	Schematische Abbildung - weitere Details siehe Produktfamilienzeichnung im Download Center
Pitch	18.8 mm

Type of note	Note on application
Note	The technical data applies when using external part HDFK 50A-IB - 0711328

Rated current	150 A
Conductor cross section	50 mm²

Clearances and creepage distances	Metal wall 1.0 mm ... 6.0 mm IEC 60947-7-1:2002-07
Application	Metal wall 1.0 mm ... 6.0 mm
Specification	IEC 60947-7-1:2002-07
Minimum clearance - inhomogeneous field (III/3)	8 mm
Minimum creepage distance value (III/3)	8 mm

Connection in acc. with standard	CSA
Safety note	• Only electrically qualified personnel may install and operate the product. To recognize and prevent danger, the qualified personnel must be familiar with the basics of electrical engineering.
	• Observe the technical data provided here and refer to the documents listed under “Downloads”. The download area contains important information, such as installation notes, technical drawings, and 3D data.
	• The cable entry funnel is not safe to touch. Never connect or disconnect the terminal when it is energized. Take appropriate steps to ensure touch protection.
	 There is no electrical contact to the housing. Make sure that protective grounding is provided for green/yellow color variants and articles marked with PE.

China RoHS	Environmentally friendly use period: unlimited = EFUP-e
	No hazardous substances above threshold values