|
|
|
Image is illustrative
|
Inductive Sensor NCN8-18GM40-N0-V1, M18, NAMUR, NC, Sn 8mm, SF 300Hz, yellow LED, -25..100°C, ss 1.4305, PBT, SIL2, M12 4pin, IP67, Pepperl+Fuchs Code:
181114
€43.00
/pc
(€52.46 /pc with VAT)
Manufacturer
:
Availability:
In Stock
|
Weight:
0.045 kg/pc
|
|
|
|
|
|
Inductive Sensor NCN8-18GM40-N0-V1, M18, NAMUR, NC, Sn 8mm, SF 300Hz, yellow LED, -25..100°C, ss 1.4305 ?PBT, SIL2, M12 4pin, IP67, Pepperl+FuchsInductive sensor NCN8-18GM40-N0-V1
- 8 mm non-flush
- Stainless steel housing
- Usable up to SIL 2 acc. to IEC 61508
Datasheet excerpt: Technical data of NCN8-18GM40-N0-V1
General specifications |
Switching function | Normally closed (NC) |
Output type | NAMUR |
Rated operating distance | 8 mm |
Installation | non-flush |
Assured operating distance | 0 ... 6.48 mm |
Actual operating distance | 7.2 ... 8.8 mm typ. 8 mm |
Reduction factor rAl | 0.42 |
Reduction factor rCu | 0.4 |
Reduction factor r304 | 0.72 |
Output type | 2-wire |
Nominal ratings |
Nominal voltage | 8.2 V (Ri approx. 1 kΩ) |
Switching frequency | 0 ... 300 Hz |
Hysteresis | 1 ... 15 typ. 5 % |
Reverse polarity protection | reverse polarity protected |
Short-circuit protection | yes |
Current consumption | |
| Measuring plate not detected | min. 3 mA |
| Measuring plate detected | ≤ 1 mA |
Switching state indicator | Multihole-LED, yellow |
Functional safety related parameters |
MTTFd | 1914 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 0 % |
Compliance with standards and directives |
Standard conformity | |
| NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 |
| Electromagnetic compatibility | NE 21:2007 |
Approvals and certificates |
FM approval | |
| Control drawing | 116-0165 |
UL approval | cULus Listed, General Purpose |
CSA approval | cCSAus Listed, General Purpose |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions |
Ambient temperature | -25 ... 100 °C (-13 ... 212 °F) |
Storage temperature | -40 ... 100 °C (-40 ... 212 °F) |
Mechanical specifications |
Connection type | Connector M12 x 1 , 4-pin |
Core cross-section | - |
Housing material | Stainless steel 1.4305 / AISI 303 |
Sensing face | PBT |
Housing diameter | 18 mm |
Degree of protection | IP67 |
General information |
Use in the hazardous area | see instruction manuals |
| Category | 1G; 2G; 1D |
|
|
|
|
|