e-Elit - leading
electronic and automation component
online distributor

	Items:	Total:
	0	€0.00

Show all products categ.

Need assistance?

Simatic DP, interface module IM151-1 for ET200S, incl. terminating module, data volume 244byte for each input ?output, max. 63 peripheriemodules, Profibus DP V0 ?V1, up to 2m with connectable, bus interface via 9-way sub-D, Siemens

General information
Vendor identification (VendorID)		806Ah
Supply voltage
Mains buffering
● Mains/voltage failure stored energy time		20 ms
Input current
from supply voltage 1L+, max.		200 mA
Power loss
Power loss, typ.		3.3 W
Address area
Addressing volume
● Inputs		244 byte
● Outputs		244 byte
Interfaces
Transmission procedure		RS 485
Interface physics, RS 485		Yes; 9-pin sub D socket
PROFIBUS DP
● Output current, max.		80 mA
● Transmission rate, max.		12 Mbit/s; 9,6 / 19,2 / 45,45 / 93,75 / 187,5 / 500 kbit/s; 1,5 / 3 / 6 / 12 Mbit/s
● SYNC capability		Yes
● FREEZE capability		Yes
● Direct data exchange (slave-to-slave communication)		Yes
● Cable length, max.		1 200 m
Protocols
Supports protocol for PROFINET IO		No
PROFIBUS DP		Yes
Protocols (Ethernet)
● TCP/IP		No
Isochronous mode
Isochronous operation (application synchronized up to terminal)		No
Interrupts/diagnostics/status information
Alarms		Yes
Diagnostic functions		Yes
Diagnostics indication LED
● Bus fault BF (red)		Yes
● Group error SF (red)		Yes
● Monitoring 24 V voltage supply ON (green)		Yes
Potential separation
between backplane bus and electronics		No
between electronic block and PROFIBUS DP		Yes
between supply voltage and electronics		No
Permissible potential difference
between different circuits		75 V DC/60 V AC
Isolation
Isolation tested with		500 V DC
Standards, approvals, certificates
CE mark		Yes
UL approval		Yes
Ambient conditions
Ambient temperature during operation
● min.		0 °C
● max.		60 °C
Dimensions
Width		45 mm
Height		119.5 mm
Depth		75 mm
Weights
Weight		150 g
last modified:		11/21/2017