Enhanced Modbus Master/Slave Communications Interface Module w. Reduced Data Block, f. ControlLogix, ProSoft

inRAx® Enhanced Modbus Master/Slave Interface Module With Reduced Data Block, Communication Speed: 110 Baud - 115.2 KBPS, Communication Protocol: Modbus, Interface: Serial Applications Port (P1, P2), Power Supply: Backplane Current Load: 800 MA At 5.1 VDC, 3 MA At 24 VDC, Connection Cables: RJ45 To DB-9 M Cables, RS-232, 5 FT Ethernet Straight-Thru Cable, Memory: 5000 16-Bit Registers, Temperature Rating: 0 - 60 DEG C, Indicator: LED: Battery Status (ERR), Application Status (APP), Module Status (OK), Response Time: RTS On/Off Delay: 0 - 65535 MS, Environmental Conditions: Relative Humidity: 5 - 95% Non-Condensing, Shock: 30 G, Vibration: 5 G, Communication Parameter: Parity: none, odd or even, Data Bits: 5, 6, 7, 8, Stop Bits: 1 or 2, Standard/Approvals: CE marked, GOST-R certified, KC certified, UL/cUL listed, CB Safety, Ex certified, Application: For ControlLogix controllers

• Item Name: Enhanced Modbus Master/Slave Interface Module With Reduced Data Block

• Sub Brand: inRAx®

• Communication Speed: 110 Baud - 115.2 KBPS

• Communication Protocol: Modbus

• Interface: Serial Applications Port (P1, P2)

• Power Supply: Backplane Current Load: 800 MA At 5.1 VDC, 3 MA At 24 VDC

• Connection Cables: RJ45 To DB-9 M Cables, RS-232, 5 FT Ethernet Straight-Thru Cable

• Memory: 5000 16-Bit Registers

• Temperature Rating: 0 - 60 DEG C

• Environmental Conditions: Relative Humidity: 5 - 95% Non-Condensing, Shock: 30 G, Vibration: 5 G

• Response Time: RTS On/Off Delay: 0 - 65535 MS

• Indicator: LED: Battery Status (ERR), Application Status (APP), Module Status (OK)

• Communication Parameter: Parity: none, odd or even, Data Bits: 5, 6, 7, 8, Stop Bits: 1 or 2

The MVI56E-MCM act as input/output modules on the ControlLogix backplane, making Modbus data appear as I/O data to the processor. Two independently configurable serial ports can operate on the same or different Modbus networks. The MVI56E-MCM is designed for standard process applications and the MVI56E-MCMXT is designed for the Logix-XT control platform, allowing it to operate in extreme environments. Can tolerate higher operating temps, and has conformal coating for protection in harsh or caustic conditions

• Backward-compatible with previous MVI56-MCMR version
• 10/100 MB Ethernet port for configuration with Auto Cable Crossover Detection
• CIPconnect-enabled network configuration and diagnostics monitoring using ControlLogix 1756-ENxT modules and EtherNet/IP pass-thru communications
• Sample Ladder Logic or Add-On Instruction (AOI) used for data transfers between module and processor
• Internal web page access to product documentation, module status, and firmware update software
• 4-character, scrolling LED display of status and diagnostic data in plain English
• ProSoft Discovery Service (PDS) software finds the module on the network and assigns a temporary IP address to facilitate module access and configuration
• Personality Module (non-volatile CF card) to store all configuration settings, allowing quick in-the-field product replacement by transferring the CF card
• Auto-crossover cable detection
• Ideal solution for remote chassis installations
• Standards: CE marked, GOST-R certified, KC certified, UL/cUL listed, CB Safety, Ex certified
• Applications: For ControlLogix controllers